BVFBX - DTR602 (031892D)

  • MSDS: BVFBX
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: DTR602 (031892D)
  • National Stock Number: 8010-00N051244
Product Identification

Product ID:DTR602 (031892D)
MSDS Date:03/30/1992
FSC:8010
NIIN:00N051244
MSDS Number: BVFBX

Responsible Party
PPG INDUSTRIES INC
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 88373

Contractor
PPG INDUSTRIES INC
ALLISON PARK, PA 15101 US

Telephone: 412-492-5555

Cage: 88373

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25-30%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 10-15%

OSHA PEL 1000 PPM

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (LIGHT

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K


SOLVENT NAPHTHA; (HEAVY AROMATIC SOLVENT NAPHTHA)

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


VM&P NAPHTHA; (LIGHT ALIPHATIC SOLVENT NAPHTHA)

CAS: 64742-89-8

Fraction By Weight: 30-35%

OSHA PEL 300 PPM;400 STEL

ACGIH TLV: 300 PPM


PROPIONIC ACID, 2-METHYL-, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K


TO DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST

RTECS: 9999999ZZ


BELOW STATED LIMIT, AS APPROPRIATE.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES IRRIT. SKIN:MAY CAUSE MOD IRRIT. INHAL:VAP & SPRAY MIST
MAY BE HARMFUL IF INHALED. VAP IRRITS EYES, NOSE & THROAT. RPTD
EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN &
NERV SYS DMG. INTENTIONAL MISUSE BY DELIB CONCENTRATING & INHALING
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONTENTS CAN BE HARMFUL/FATAL.
REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS MAY INDICATE
EXCESSIVE EYE CONT. DRYNESS, ITCH, CRACKING, BURNING, REDNESS &
SWELL ARE CNDTNS ASSOC W/EXCESSI VE SKIN CONT. NOTE:TOLUENE APPEARS
ON NAVY OCCUP CHEM REPRO HAZS LIST. SEEK CONSULTATION FROM APPROP
HLTH (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP
& OT HER SUPPORTIVE MEASURES AS REQD. IF INGEST, ANY TYPE OF
OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING USE OF THIS PROD,
CONT POIS CTL CTR, EMER ROOM/MD IMMED; HAVE MSDS INFO AVAIL.

Fire Fighting

Flash Point Method:PMCC
Flash Point:77.0F,25.0C
Lower Limits:1.5%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING CLASS IB
(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPP DATA)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS IB FLAMM LIQS.
AVOID FREE FALL OF LIQS IN EXCESS OF FEW INCHES.
Other Precautions:IF THIS MATL IS PART OF MULTIPLE COMPONENT COATING
SYS, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXT MAY HAVE HAZS OF ALL OF ITS PARTS. CONTAINERS SHOULD
BE GROUNDED WHEN POUR ING.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) AIR PURIFYING/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO
REDUCE EXPOS. READ RESP MFR'S INS TRUCTIONS & LITERATURE CAREFULLY
(ING 7)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIM & LEL (ING 8)
Protective Gloves:NITRILE RUBBER/NEOPRENE RUBBER GLOVES.
Eye Protection:CHEM-TYPE SPLASH GOGGS & FULL FCSHLD.
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . WEAR PROT CLTHG, INCLUDING IMPERMEABLE
APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:FLAMM LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN
EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO
HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT S
URFS. EFTS OF OVEREXP:PROFESSIONALS CONCERNING LATEST HAZ LIST INFO
& SAFE HNDLG & EXPOS INFO .

Chemical Properties

Boiling Pt:B.P. Text:>133F,>56C
Vapor Pres:65.7
Vapor Density:HVR/AIR
Spec Gravity:0.81
Evaporation Rate & Reference:817 (BUOAC=100)
Solubility in Water:14.5%
Appearance and Odor:NON-VISCOUS LIQUID W/ODOR CHARACTERISTIC OF
SOLVENTS LISTED IN INGS.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED INCLUDING CARBON MONOXIDE.

Disposal

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL & LOCAL ENVIRON CONTROL REGS. EMPTY CONTAINERS
SHOULD BE RECYCLED OR DISPOSED OF THRU AN APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.